[Amps] 8877 Grid Connection DC or Not

["Jim W7RY" <jimw7ry@gmail.com>]

Has anyone run the grid of an 8877 not connected to ground as far as DC is 
concerned? 

I really need to meter the grid current by bypassing the grid to ground with 
capacitors and several 10 ohm resistors in order to meter grid current. 
Metering grid current by the CT of the filament transformer, and the – of the 
power supply cant be done. Because the power supply – is directly grounded.

Anyone had luck doing this?

Thanks 73
Jim W7RY
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps