Mike, chimneys can be homebrewed with Teflon sheet and small screws to form
a cylinder. Works well at 432 MHz so it will work at HF as well.
73,
Gerald K5GW
In a message dated 10/28/2016 1:45:26 P.M. Central Daylight Time,
k4gmh@arrl.net writes:
Hello,
Need a couple of teflon chimneys for a pair of GS35B amps. Suggestions on
where I can get them?
Presently using PVC, but have had not good results in the long run with
these type of chimneys especially since I do a lot of RTTY contesting.
73,
Mike, K4GMH
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|