Amps
[Top] [All Lists]

Re: [Amps] Chimney for GS35B

To: "Mike" <k4gmh@arrl.net>, <amps@contesting.com>
Subject: Re: [Amps] Chimney for GS35B
From: "Jeff AC0C" <keepwalking188@ac0c.com>
Date: Fri, 28 Oct 2016 15:04:14 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Mike,

I used some silicone tubing intended for turbocharger interconnects that I bought from a racing parts outfit on the web. It's almost the exact right size and won't melt. It's about $20/foot or so.

73/jeff/ac0c
www.ac0c.com
alpha-charlie-zero-charlie

-----Original Message----- From: Mike
Sent: Thursday, October 27, 2016 8:10 AM
To: amps@contesting.com
Subject: [Amps] Chimney for GS35B

Hello,

Need a couple of teflon chimneys for a pair of GS35B amps.  Suggestions on
where I can get them?

Presently using PVC, but have had not good results in the long run with
these type of chimneys especially since I do a lot of RTTY contesting.

 73,
 Mike, K4GMH
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>