Amps
[Top] [All Lists]

Re: [Amps] Alpha 76A

To: "Paul Christensen" <w9ac@arrl.net>, <amps@contesting.com>
Subject: Re: [Amps] Alpha 76A
From: "Jim W7RY" <w7ry@centurytel.net>
Reply-to: Jim W7RY <w7ry@centurytel.net>
Date: Tue, 25 Nov 2014 14:05:25 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Find a picture and count the terminals on one half.

I'm 99% sure it's 20 degrees. Same as the Ten Tec Titan. Same band switch manufacturer for both switches.

73
Jim W7RY


-----Original Message----- From: Paul Christensen
Sent: Tuesday, November 25, 2014 12:58 PM
To: amps@contesting.com
Subject: [Amps] Alpha 76A

I am nearly complete with a re-design of an Alpha 76A front panel.
Apparently, RF Concepts will no longer providing them.  I'm doing this as a
courtesy and don't have the amp in front of me.  The owner cannot answer
this question:

What is the band switch detent spacing?  30 degs, 20 degs, or ?  Every image
on the web shows the amp in a side profile and it's tough to gauge from the
image.  I've laid the panel out with 30 deg. spacing but it does not look
right and seems more like 20 degs.

Can anyone with a model 76 please verify?  Tnx!

Paul, W9AC

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>