Thanks for your suggestions, guys.
It's not the K3. When I disconnect the amp Key In line from the K3 (and
leave it plugged into the amp) and short it (with no RF drive from the
K3) I get the same behaviour.
Hmm... It could be the cable I'm using for the Key In line has a
problem. I'll try a different one and see what happens.
Sigh - same thing.
I tried Larry's suggestion and got Fault Code 6. Looked it up in the
manual and it says "Output Relay closure fail and gives a phone number.
I phoned the number but, being Saturday, they're closed. I left a
message and presume they'll call back on Mon.
73, Jim VE7FO
On 2014-05-24 04:26, Jim Smith wrote:
Got a K3 driving the amp.
After transmitting for a few seconds The Oper light goes out and the
Stby light comes on and whoever I'm talking to starts saying, "Agn Agn."
Same thing happens with 0.0W of drive from K3
Same thing happens when I disconnect the Key In line from the K3 and
simply short the line.
Any ideas of how to fix this?
73, Jim VE7FO
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|