Amps
[Top] [All Lists]

Re: [Amps] Best source for Gigavac GH-1 ?

To: Amps <amps@contesting.com>
Subject: Re: [Amps] Best source for Gigavac GH-1 ?
From: Bill Turner <dezrat1242@yahoo.com>
Date: Sat, 09 Nov 2013 21:31:42 -0800
List-post: <amps@contesting.com">mailto:amps@contesting.com>
ORIGINAL MESSAGE:          (may be snipped)

On Sat, 09 Nov 2013 20:54:37 -0800, Jim wrote:

>
>That would have a lot to do with the use they get. How many contest QSOs 
>do you make in a year?  I do a lot, and after the second time having to 
>replace relays in the middle of a contest, I've switched to 
>semi-breakin.  :)  I use Ten Tec Titans, which are well sequenced.
>
>73, Jim K9YC

REPLY:

The math is interesting. The relay is rated at 2 million operations.

Sending TEST W6WRT TEST is 13 characters
I can easily sent that 2000 times in a contest plus exchanges any S&P
That's 24000 relay operations at a minimum
2,000,000 /  24000 = 84 contests not including whatever other operating you
do.

Conclusion: QSK with a relay is expensive.  
PIN diodes might be a good alternative, but they have their problems too. 

73, Bill W6WRT
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>