Re: [Amps] Measuring tank coil inductance

[Vic K2VCO <k2vco.vic@gmail.com>]

I have learned that to use the AADE successfully you have to disconnect everything from 
the component you are testing!
On 4/25/2013 6:39 PM, Bill Turner wrote:
> ORIGINAL MESSAGE (may be snipped):
> On Thu, 25 Apr 2013 17:29:02 -0700, you wrote:
>
> > I made a temporary hookup which includes the tube, the plate choke, the 
> > bandswitch and the
> > pi-net components. I intend to set up the tank as follows:
> REPLY:
> If you're going to use the AADE unit to set the capacitance in-circuit, be
> sure to disconnect the plate choke.
>
> Bill, W6WRT
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
--
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco/

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps