I think the Gigavac K60C has been replaced by the more modern G60C. If it
has the same specs (roughly) as the G60C, it is not suitable for QSK. The
G60C relay is designed for switching DC or 60HZ loads up to 35A and 40KV. It
is quite slow (15mS make and break times). Best to find a relay intended for
RF switching with switching times in the 2-7 mS range
73,
Jim W8ZR
> -----Original Message-----
> From: Amps [mailto:amps-bounces@contesting.com] On Behalf Of Louis
Parascondola
> Sent: Sunday, April 07, 2013 11:53 AM
> To: amps@contesting.com
> Subject: [Amps] vacuum relay
>
> Hi, I have a Kilovac K60C381 relay 26v. Would this be good for QSK at a
KW using
> W7RY system?
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|