Amps
[Top] [All Lists]

Re: [Amps] plate voltage meter shunt

To: "Douglas Johnson" <w9iix1@yahoo.com>, "AMPS" <amps@contesting.com>
Subject: Re: [Amps] plate voltage meter shunt
From: "Carl" <km1h@jeremy.mv.com>
Date: Sat, 3 Nov 2012 17:46:30 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Mouser carries Ohmite flatpak HV resistors; Ive been using them to replace the old carbons in many amps.

Carl
KM1H


----- Original Message ----- From: "Douglas Johnson" <w9iix1@yahoo.com>
To: "AMPS" <amps@contesting.com>
Sent: Saturday, November 03, 2012 5:15 PM
Subject: [Amps] plate voltage meter shunt


I am installing a meter to measure plate voltage 1-5000v@ 1a dc, the meter has a 1ma fs rating. the serial resistance I have made up in the past has been 3 watt metal film resistors in series. since they can only rated for 200v per resistor it takes many to do the job. Can some other resistor type with a higher rating be used in a safe manner for this purpose?...tnx, Doug,w9iix
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps


-----
No virus found in this message.
Checked by AVG - www.avg.com
Version: 10.0.1427 / Virus Database: 2441/5371 - Release Date: 11/03/12


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>