Chas: My suggestion was to hook up the amps in series but only key the one
you want to use. Rest are pass through, either the exciter or the amplified
signal. Works ok on phone, data and probably semi break in, but there are
issues with qsk.
On Aug 23, 2012 6:27 PM, "chas" <chasm@texas.net> wrote:
> On 8/23/12 3:32 PM, Michael Clarson wrote:
> > N2BC: I understand now. I use an SB220, no QSK, so that didn't enter the
> > thought process. So, IF one were to series QSK capable amps, it would
> > require rework of the amps and some interconnection with the first one,
> > creating a QSK amp string, and at that point, the switching box may be a
> > simpler approach. -- Mike, WV2ZOW
>
> I am confused by this thread's apparent intent...
> I first thought that it was about having two or three amps powered up and
> then making your choice as to which you wanted to use by switching the PA
> relay from the txcvr which would key one of the active amps (with its
> tuner).
> If you wanted to use a different amp/tuner, you would switch from/to the
> keying or activating coax of the first amp to the next amp. The next
> impression I got was that of keying two amps at the same time ??? as if
> that
> would solve anything. I don't think that output is "additive" or summing
> which means running two 300W amps simultaneously is not going to result in
> 600W <G>.
>
> I can see value in the idea of switching from my cube to my SB220 to my
> 374A
> to gain greater power but I should think that the better idea would be to
> just choose the best amp for the purpose at hand and leave the others
> turned/powered off. If there is a way to do this (while taking into
> consideration RF sensing), I would like to know how to do it.
>
> I must have missed the original message which explained the purpose or why
> the thread's originator wanted to switch amps...
>
> just confused and asking for clarification?
>
> 73 es tnx chas k5dam
>
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|