I have not died in a house fire.
Your language is a little coarse isn't it?
And it works fine. I used and others are advised to use Teflon wire.
No go back into the hole you climbed out of!
73
Jim W7RY
-----Original Message-----
From: Gudguyham@aol.com
Sent: Sunday, July 08, 2012 12:32 PM
To: manfred@ludens.cl ; amps@contesting.com
Subject: Re: [Amps] Filament Xfmr
In a message dated 7/8/2012 3:26:11 P.M. Eastern Daylight Time,
manfred@ludens.cl writes:
> Should I be concerned with the wire size.
Rich Measures AG6K uses #22 wire on a 30A circuit to feed a pair of
3-500's. He does this intentionally due to the voltage drop he wants.
Either
everyone who did this modification he suggests died in a house fire in
doing
so or they are just not coming forward to tell us it worked OK for them.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|