Eimac produced a good book called "Care and Feeding of Power Grid Tubes". I'm
sure I saw a PDF somewhere so it's worth googling to see what you can find.
About 20 years ago I wrote to Eimac and asked about the book's availability and
they just sent me a copy.
The W6SAI 'Radio Handbook' contains some good information on the subject.
If you can't find a copy of the Eimac PDF on the www then give me a shout and
I'll see if I can find a copy for you
Cheers
Dave G0OIL
----- Original Message -----
From: Jerry Kaidor <jerry@tr2.com>
Sent: 21 June 2012 06:49
To: amps@contesting.com
Subject: [Amps] Tube Theory?
Hello,
Anybody know a good book to get on tube theory? I'd just like the
basics on how to go from a set of specs and curves to a design. I used
to know this stuff but that was a LONG time ago. We recently moved -
and I can't find a lot of stuff. Including my 70's college textbook on
devices and circuits, which had a good treatment of it. Load lines,
plate resistance, quiescent points, interelectrode capacitance, etc
etc. Can't find it anywhere. I did locate my two copies of "The Art
of Electronics", but they don't say word one about tubes.
I have several ARRL handbooks from the 50's to the latest one. Don't
know if there's enough detail in those to actually design anything.
I see that "The Care and Feeding of Power Grid Tubes" is now available
as a free download...
- Jerry Kaidor, KF6VB
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|