Amps
[Top] [All Lists]

Re: [Amps] every db lost re Tubes vs. Solid State

To: amps@contesting.com, jim@audiosystemsgroup.com
Subject: Re: [Amps] every db lost re Tubes vs. Solid State
From: Tom Horton <k5iid@sbcglobal.net>
Date: Mon, 30 Apr 2012 15:25:25 -0700 (PDT)
List-post: <amps@contesting.com">mailto:amps@contesting.com>
Amen!
Tom iid

"Socialism is a philosophy of failure,
the creed of ignorance, and the gospel of envy,
its inherent virtue is the equal sharing of misery.."
-- Winston Churchill

"Democracy depends on well-informed voters; absent that, it is all mud flowing 
down hill."
--Charles Harpole

"Luck is a dividend of sweat. The more you sweat, the luckier you get."

If you don't like my signature, well, I am sorry. But I will use it because it 
is what I believe. 

K5IID Tom Horton Hillsboro, TX
E sorter for ARRL W5 bureau
Same call for 55 years!

--- On Mon, 4/30/12, Jim Brown <jim@audiosystemsgroup.com> wrote:


From: Jim Brown <jim@audiosystemsgroup.com>
Subject: Re: [Amps] every db lost re Tubes vs. Solid State
To: amps@contesting.com
Date: Monday, April 30, 2012, 12:47 PM


On 4/29/2012 11:01 PM, Charles Harpole wrote:
> I know ever coax joint, every coax switch, and so on costs rcv db.

You "know" WRONG!  This is one of those often repeated myths with little 
basis in fact. A properly done coax connection is essentially lossless 
at HF.  Loss in a switch depends on the quality of the switch. There are 
commonly available relays and switches and connectors with loss too low 
to measure, and there are poorly built and junk parts that will 
overheat, go intermittent, and/or fail.

73, Jim K9YC
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>