Amen!
> Date: Mon, 30 Apr 2012 10:47:04 -0700
> From: jim@audiosystemsgroup.com
> To: amps@contesting.com
> Subject: Re: [Amps] every db lost re Tubes vs. Solid State
>
> On 4/29/2012 11:01 PM, Charles Harpole wrote:
> > I know ever coax joint, every coax switch, and so on costs rcv db.
>
> You "know" WRONG! This is one of those often repeated myths with little
> basis in fact. A properly done coax connection is essentially lossless
> at HF. Loss in a switch depends on the quality of the switch. There are
> commonly available relays and switches and connectors with loss too low
> to measure, and there are poorly built and junk parts that will
> overheat, go intermittent, and/or fail.
>
> 73, Jim K9YC
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|