One or both step start resistors gone open?
73,
Tim - N3XX
----- Original Message -----
From: "chas" <chasm@texas.net>
To: "Amps Amps" <amps@contesting.com>
Sent: Wednesday, October 12, 2011 3:18 AM
Subject: [Amps] 374A will not turn on ??? Suggestions?
>
> I have 220V going into the back of this amp which has been working
> perfectly
> for the past couple of months. The fuses are good, good spring tension,
> no
> lights on meters, no fan, nothing.
>
> Almost as if the front panel on/off switches are non functioning.
>
> Any ideas?
> This is a twin CPX800A7 rebuilt by RL Howard
> serial number 704n
>
> no smoke, no flashes, etc. puzzled. working one day, then not the
> next???
> the on/off switches don't have that snap/catch feel either.
>
> thanks es 73
>
> Chas k5dam
>
>
>
> --
> A: Because it messes up the order in which people normally read text. <B>
> Q: Why is top-posting such a bad thing?<B>
> A: Top-posting. <b>
> Q: What is the most annoying thing in e-mail? <B>
>
> .
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|