Amps
[Top] [All Lists]

Re: [Amps] Should a blower run after amp shutdown?

To: amps@contesting.com
Subject: Re: [Amps] Should a blower run after amp shutdown?
From: "Roger (sub1)" <sub1@rogerhalstead.com>
Date: Sat, 04 Jun 2011 09:27:27 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
On 6/4/2011 5:16 AM, Ken wrote:
> SniP
>
>> resistors traceable back to NBS within 0.005%. Oscilloscopes, recording
>> instruments, bridges for measuring down into the milliohm range and
>> receivers to monitoring RFI signal strength.
>> It's been a long time, but that equipment seems rather primitive now.
> Yes, it has been a long time...the NBS is now called the NIST.   ;~)
>
> They changed it about 1988.

Yup, I quit in 87 after 26 years as a tech. Earned a BS in CS with 
minors in Math and Art in the winter of 90. Started on my masters, but 
was offered a good job which ended my quest for a masters. <:-))
It'll always remain the NBS to me.

73

Roger (K8RI)

> Ken
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>


_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>