Amps
[Top] [All Lists]

Re: [Amps] AL-811 & 572's

To: "Carl" <km1h@jeremy.mv.com>, "Thomas F. Giella NZ4O" <nz4o@tampabay.rr.com>, "amps @ COL" <amps@contesting.com>
Subject: Re: [Amps] AL-811 & 572's
From: "Mitch Cox" <ww4cox@embarqmail.com>
Date: Sat, 22 Jan 2011 13:01:15 -0500
List-post: <amps@contesting.com">mailto:amps@contesting.com>
I am sure that many on here would argue with a sign board. 
  ----- Original Message ----- 
  From: Carl 
  To: Mitch Cox ; Thomas F. Giella NZ4O ; amps @ COL 
  Sent: Saturday, January 22, 2011 12:13 PM
  Subject: Re: [Amps] AL-811 & 572's


  Im sure many of us would disagree with many of those IMD specs. The 572B is 
  off by at least 4-5dB.

  Also realize that the Svetlana versions are using smaller anodes and non 
  hardened glass. They melt down rather easy during a run away parasitic.

  The Chinese at least spec the Pd at 125W and the hardened glass is thinner 
  than Cetron.

  Carl
  KM1H


  ----- Original Message ----- 
  From: "Mitch Cox" <ww4cox@embarqmail.com>
  To: "Thomas F. Giella NZ4O" <nz4o@tampabay.rr.com>; "amps @ COL" 
  <amps@contesting.com>
  Sent: Saturday, January 22, 2011 7:57 AM
  Subject: Re: [Amps] AL-811 & 572's


  > Here you go;
  > 
http://www.mgs4u.com/RF-Microwave/TriodeTubeDataCharacteristicChartbyW6LEG.pdf
  >  ----- Original Message ----- 
  >  From: Thomas F. Giella NZ4O
  >  To: amps @ COL
  >  Sent: Saturday, January 22, 2011 7:53 AM
  >  Subject: Re: [Amps] AL-811 & 572's
  >
  >
  >  Thanks for the input guys. I'm aware of the limitations of the power 
  > supply
  >  on the AL-811. I was looking for performance information about the 572B 
  > tube
  >  itself.
  >
  >  73 & GUD DX,
  >  Thomas F. Giella, NZ4O
  >  Lakeland, FL, USA
  >  nz4o@tampabay.rr.com
  >  John 3:16 <><
  >
  >  NZ4O Solar Space Weather And Geomagnetic Data Archive: 
  > http://www.nz4o.org
  >  NZ4O Daily LF/MF/HF/6M Radiowave Propagation Forecast:
  >  http://www.solarcycle24.org
  >
  >
  >  ----- Original Message ----- 
  >  From: "Thomas F. Giella NZ4O" <nz4o@tampabay.rr.com>
  >  To: "amps @ COL" <amps@contesting.com>
  >  Sent: Friday, January 21, 2011 12:50 PM
  >  Subject: [Amps] AL-811 & 572's
  >
  >
  >  >I have an AL-811 running 572B's instead of 811's. The manual says for 
  > RTTY
  >  > mode to use a maximum of 150 ma on the grid and 400 ma on the plate for
  >  > the
  >  > 811's.
  >  >
  >  > What would be the maximum grid and plate current that I could use on 
  > the
  >  > 572B's on RTTY?
  >  >
  >  > 73 & GUD DX,
  >  > Thomas F. Giella, NZ4O
  >  > Lakeland, FL, USA
  >  > nz4o@tampabay.rr.com
  >  >
  >  > NZ4O Solar Space Weather And Geomagnetic Data Archive: 
  > http://www.nz4o.org
  >  > NZ4O Daily LF/MF/HF/6M Radiowave Propagation Forecast:
  >  > http://www.solarcycle24.org
  >  >
  >  >
  >  > _______________________________________________
  >  > Amps mailing list
  >  > Amps@contesting.com
  >  > http://lists.contesting.com/mailman/listinfo/amps
  >
  >  _______________________________________________
  >  Amps mailing list
  >  Amps@contesting.com
  >  http://lists.contesting.com/mailman/listinfo/amps
  >
  >
  >  -----
  >  No virus found in this message.
  >  Checked by AVG - www.avg.com
  >  Version: 10.0.1191 / Virus Database: 1435/3392 - Release Date: 01/20/11
  > _______________________________________________
  > Amps mailing list
  > Amps@contesting.com
  > http://lists.contesting.com/mailman/listinfo/amps 



  -----
  No virus found in this message.
  Checked by AVG - www.avg.com
  Version: 10.0.1191 / Virus Database: 1435/3396 - Release Date: 01/22/11
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>