Hi Paul,
Yes, if the shield is bonded to the chassis, and as long as the chassis is
at a lower temperature than the shield, then there will be a heat flow to
the chassis. However, the devil is in the details, and if the shield and the
chassis are made of aluminum, say .063" thick, then I'd guess the thermal
transfer would be small compared to the heat generated by the tubes.
>
> The heat shield is bonded to the chassis. Won't that pull heat from the
> shield?
> Paul K0UYA
> ----- Original Message -----
> From: "Jim Garland" <4cx250b@muohio.edu>
> To: <amps@contesting.com>
> Sent: Saturday, December 18, 2010 8:40 PM
> Subject: [Amps] Black heat shields
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|