Only if the tube specifications are far exceeded.
3x 4-400 will do the same then.
73
Peter
-----Original Message-----
From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
Behalf Of Carl
I just serviced a LK-800C and discovered 6-32 steel hardware in the RF path
on both sides of the plate blocking cap. One side was darkened overall and
the other was black where the threads entered the cap, it looked like rust
under magnification. This amp will do an easy 3500-4000W + with sufficient
drive.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|