| To: | <amps@contesting.com> |
|---|---|
| Subject: | Re: [Amps] Pulse tuning |
| From: | "DF3KV" <df3kv@t-online.de> |
| Date: | Thu, 23 Sep 2010 22:18:01 +0200 |
| List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
No. Plate current will not be way higher and dissipation will not either. I tune for maximum out in the center of the band and don´t touch anything while moving around in a contest. Output power drop is not more then 1db at the edges. Your loaded Q might be too high! 73 Peter -----Original Message----- From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On ## tune with a cxr, and if something is off resonance a bit, then plate current is way higher than normal, and po is way less than normal. Plate diss is way higher than normal. _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
| <Prev in Thread] | Current Thread | [Next in Thread> |
|---|---|---|
| ||
| Previous by Date: | Re: [Amps] Pulse tuning, DF3KV |
|---|---|
| Next by Date: | Re: [Amps] Pulse tuning, Alek Petkovic |
| Previous by Thread: | [Amps] Pulse tuning, Jim Thomson |
| Next by Thread: | Re: [Amps] Pulse tuning, Roger |
| Indexes: | [Date] [Thread] [Top] [All Lists] |