My Henry 2K4 has chimneys made by Radnoti Glass -- Arcadia, Calif.
They curve inward at the tops. Is this what Henry shipped originally I
wonder? They seem to be well made and they do work well.
John KX5JT
-----Original Message-----
From: Gene <jbigham2@kc.rr.com>
To: amps@contesting.com
Sent: Fri, Jul 2, 2010 9:31 pm
Subject: [Amps] Chimney
The Henry 2K Classic X here has the slight curve inward on top of
chimneys,
but with a fan pressurizing the compartment below the tube deck, and the
amount of air the fan moves, there is no chance for pin or anode seals
to
get too hot. In fact with 3-500ZGs in it, running 1kw out continuous
mode
the tubes just start to get dull red to slight orange mostly near the
bottom
of the anode. At 1.5Kw they get red to orange across most of the anode.
They have the standard anode connectors.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|