The Henry 2K Classic X here has the slight curve inward on top of chimneys,
but with a fan pressurizing the compartment below the tube deck, and the
amount of air the fan moves, there is no chance for pin or anode seals to
get too hot. In fact with 3-500ZGs in it, running 1kw out continuous mode
the tubes just start to get dull red to slight orange mostly near the bottom
of the anode. At 1.5Kw they get red to orange across most of the anode.
They have the standard anode connectors.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|