A special cover bit was still a PITA alignment process. I watched them doing
it a few times when I was doing some consulting work on other items.
Carl
KM1H
----- Original Message -----
From: "Randall, Randy" <Randy.Randall@healthall.com>
To: "'Carl'" <km1h@jeremy.mv.com>; <amps@contesting.com>
Sent: Monday, April 12, 2010 5:34 PM
Subject: RE: [Amps] 813's.. Parasitic suppressor's
Got ya. I suppose that @ the factory they had a "special" cover with holes
drilled in strategic places? Or maybe even a door to allow access while
tuning? I used to have a jig to align Motorola pagers with cutouts in all
the right places!
Randy
"In theory, theory and practice are the same thing. In practice they're
not."
-----Original Message-----
From: Carl [mailto:km1h@jeremy.mv.com]
Sent: Monday, April 12, 2010 5:14 PM
To: Randall, Randy; amps@contesting.com
Subject: Re: [Amps] 813's.. Parasitic suppressor's
Only if you are having problems.
With the No Tune versions it is a royal PITA to do the alignment with that
d**n steel cover.
Carl
KM1H
----- Original Message -----
From: "Randall, Randy" <Randy.Randall@healthall.com>
To: <amps@contesting.com>
Sent: Monday, April 12, 2010 2:38 PM
Subject: Re: [Amps] 813's.. Parasitic suppressor's
> "I've had aluminum covers bent for Amp Supply....."
>
> Would it be worth it to have a new top made for my LK-500ZB?
>
> Randy AB9GO
>
>
> Confidentiality Notice: This e-mail message, including any attachments, is
> for the sole use of the intended recipient(s) and may contain confidential
> and privileged information. Any unauthorized review, use, disclosure or
> distribution is prohibited. If you are not the intended recipient, please
> contact the sender by reply e-mail and destroy all copies of the original
> message.
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
Confidentiality Notice: This e-mail message, including any attachments, is
for the sole use of the intended recipient(s) and may contain confidential
and privileged information. Any unauthorized review, use, disclosure or
distribution is prohibited. If you are not the intended recipient, please
contact the sender by reply e-mail and destroy all copies of the original
message.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|