Many antennas are rated at 5 or 10KW and traps are passe anyway in the
better designs.
RG-213 and some of the newer coaxes will handle it fine in CW/SSB.
Carl
KM1H
----- Original Message -----
From: "chas" <chasm@texas.net>
To: "Amps Amps" <amps@contesting.com>
Sent: Friday, February 05, 2010 3:06 PM
Subject: Re: [Amps] QRO Questions
> donroden@hiwaay.net wrote:
>> I've never run anything stronger than a SB-220 or a 30S-1, and I was
>> wondering
>> after seeing some of the European QRO+++ stations ....... what do they
>> use for a rotor loop ? Seems that RG-8 and PL-259s or type "N"s would
>> be a limiting factor to any QRO project ... not to mention burning up
>> TA-33 CL traps ( or other trapped beams ) ??
>>
>> Don WA4NPL
>> ____________________
>
>
> Don, I had gone way beyond that and have always assumed that they borrow
> on
> Broadcast engineering "megawatt" equipment.
>
> fwiw chas
> --
> chasm@texas.net k5dam Houston, TX
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|