Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Amps] HV relay

from [Phil Clements] [Permanent Link][Original]
To: "'MIKE DURKIN'" <patriot121@msn.com>, "'amps fourm'" <amps@contesting.com>
Subject: Re: [Amps] HV relay
From: "Phil Clements" <philc@texascellnet.com>
Date: Fri, 5 Feb 2010 15:32:22 -0600
List-post: <amps@contesting.com">mailto:amps@contesting.com> 
> If i don't need a relay for HV control and just for Tx inhibit ... then
this - becomes
> much (much) more easy.

Look at the Alpha 77DX/SX. The HV comes on immediately; only the PTT line is
inhibited until the timer cycles. As long as the tube is biased to cut-off
during this time, no problem.

Phil, K5PC



_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] QRO Questions, Evert Bakker \(PA2KW\)
Next by Date:  Re: [Amps] QRO Questions, Roger
Previous by Thread:  Re: [Amps] HV relay, James Colville
Next by Thread:  Re: [Amps] HV relay, Jim Brown
Indexes:  [Date] [Thread] [Top] [All Lists]