Download the manuals of the AL80B and the AL82 from the Ameritron
site and compare the input and output circuit values and/or part
numbers. There may be some clues there.
Apart from that, it seems to be a really terrible thing to do to an
amplifier. Why do you want to butcher it like that?
73, Alek
VK6APK
At 11:13 AM 27/01/2010, on4aef@base.be wrote:
> It is not a question of money or to put some other types of tubes.
> It is a question of using only one 3-500Z in this amplifier and what I
>have to change to realise this not more !
> Of course I have to change the filament transformer into a 5VAC version
>because originally both 3-500Z's are in series on 12VAC !!
>
> Regards Jean ON4AEF.
>
>
>
>
>On Tue, 26 Jan 2010 14:20:24 -0800 (GMT-08:00), Colin Lamb
><k7fm@teleport.com> wrote:
> > "A. A new 3-500Z costs around $150
> > B. The grids are not grounded in a TL-922.
> > C. I dont think there is top clearance for a 4-400"
> >
> > The ham raising the question was not in the US and tubes may be more
> > difficult and expensive there. The fact that the writer was willing to
>put
> > in a new filament transformer to run one tube rather than two implied
>that
> > purchasing a replacement 3-500Z tube was not an option. I do not know
>his
> > finances, but I have been in countries where $150 is a years income for
> > some.
> >
> > No, the grids are not grounded directly, but pins 2,3 and 4 can be
> > strapped together and will work.
> >
> > I thought the 4-400 is the same height as the 3-500Z. I have
>substituted
> > directly in the SB-220 with no problem.
> >
> > Colin K7FM
>_______________________________________________
>Amps mailing list
>Amps@contesting.com
>http://lists.contesting.com/mailman/listinfo/amps
http://www.qrz.com/db/vk6apk
http://www.qrz.com/db/vk6py
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|