Seems to me it has to read BOTH in that configuration.
> About,
>
> "...Isn't it also true that in a grid driven amplifier, the cathode is
> connected to ground and the only B- connection to ground is through the
> plate current meter. This is done so the plate current meter isn't also
> reading screen current. (etc.)"
>
>
> So with a GG triode, a meter in the neg lead of the power supply filter
> caps
> to chassis ground, reads only plate current and not any grid current,
> right?
>
> TNX, Roy K6XK
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|