Amps
[Top] [All Lists]

Re: [Amps] AL-1200 Relay Confusion

To: donroden@hiwaay.net, amps@contesting.com
Subject: Re: [Amps] AL-1200 Relay Confusion
From: gudguyham@aol.com
Date: Sat, 24 Oct 2009 14:22:51 -0400
List-post: <amps@contesting.com">mailto:amps@contesting.com>
THE STEP START RELAY IS 120 VAC AND THE CONTACTOR RELAY IS 12 VDC.  If you see 
it anyway else your not reading a schematic correctly


-----Original Message-----
From: donroden@hiwaay.net
To: amps@contesting.com
Sent: Sat, Oct 24, 2009 11:27 am
Subject: Re: [Amps] AL-1200 Relay Confusion



If the AC impedance is high enough ........
Don WA4NPL


uoting "RICHARD SOLOMON" <w1ksz@q.com>:
> A quick look at the circuit and parts list shows it as a 12 VDC Coil, BUT
 the schematic shows the Coil across 110 vac.>
 73, Dick, W1KSZ

 _______________________________________________
 Amps mailing list
 Amps@contesting.com
 http://lists.contesting.com/mailman/listinfo/amps


______________________________________________
mps mailing list
mps@contesting.com
ttp://lists.contesting.com/mailman/listinfo/amps

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>