Have you checked the interlocks on both the RF deck and the power supply?
73
Jim W7RY
----- Original Message -----
From: "Charles Harpole" <k4vud@hotmail.com>
To: <amps@contesting.com>
Sent: Friday, June 26, 2009 11:51 PM
Subject: Re: [Amps] Titan quits query more
>
> Thanks for your thoughtful reply.
> So far, I have 220VAC on the power supply
> input socket, and all three of the fuses are
> ok. The two on the rear are ok and the
> fuse originally located down in the middle
> of the p.s. is ok. I do not know that this
> unit has "circuit breakers." If so, where
> are they located? I have not opened
> the units yet. It is still dead, i.e., no
> response to the "on" switch. 73
>
> Charles Harpole k4vud@hotmail.com
>
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.375 / Virus Database: 270.12.92/2203 - Release Date: 06/26/09
05:53:00
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|