Charly, check the power switch, rocker switch on the front panel. I
have a vague recollection of having had problems with an intermittent
switch on my 425 and curing it easily with contact cleaner. It was some
time ago and I don't remember the details.
73, Joe
K2XX
Charles Harpole wrote:
> Thanks for your thoughtful reply.
> So far, I have 220VAC on the power supply
> input socket, and all three of the fuses are
> ok. The two on the rear are ok and the
> fuse originally located down in the middle
> of the p.s. is ok. I do not know that this
> unit has "circuit breakers." If so, where
> are they located? I have not opened
> the units yet. It is still dead, i.e., no
> response to the "on" switch. 73
>
> Charles Harpole k4vud@hotmail.com
>
>
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|