Or use the off-set on the dvm to put zero where it needs to be.
Paul K0UYA
----- Original Message -----
From: "Gary Hinson" <Gary@isect.com>
To: <amps@contesting.com>
Sent: Wednesday, February 25, 2009 9:43 PM
Subject: Re: [Amps] Digital read out
For more accuracy, a 10-turn pot with
suitable mechanical reduction would work too, I guess. Just don't forget to
position the pot at 0 volts for 0 degrees!
73
Gary ZL2iFB
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|