Hi John:
I seem to remember an article in CQ or QST within the last 12 months that
addressed this very issue. As I recall the indicators being used were
inexpensive digital voltmeters from All Electronics.
Sorry, wish I could be more specific.......Maybe someone within the group will
remember the specific article............GL
Val, W5PUT
--- On Thu, 2/26/09, John E <johne@tds.net> wrote:
From: John E <johne@tds.net>
Subject: [Amps] Digital read out
To: amps@contesting.com
Date: Thursday, February 26, 2009, 2:02 AM
Some time ago I came across a operator that was using Potentiometers
with roller inductors and variable caps to indicate their position via a
meter or digital read out.
Have looked the web over and can not find this info.
Any one know where it is ? or know what ohm and turns work out ? or
gear ratio ?
Thanks de John KØCQW
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|