I think that's what I am going to do also, have to raid the junk boxes and
see what I have.
73,
Scott
----- Original Message -----
From: "Phil Clements" <philc@texascellnet.com>
To: "'David Craig'" <davidhcraig@verizon.net>; "'KB0NLY'"
<kb0nly@mchsi.com>; <amps@contesting.com>
Sent: Saturday, February 21, 2009 3:42 PM
Subject: RE: [Amps] 47ohm 2W resistor, who still has them?
>> Subject: Re: [Amps] 47-ohm 2W resistor, who still has them?
>>
>> You don't need carbon comp- use a pair of 100 ohm 5w Metal Oxide,
>> Mouser
>> PN 286-100-RC. Make the strap from the tube anode to the plate choke as
>> one
>> piece, make a "U" just big enough to fit 2 resistors inside, drill a
>> whole
>> for the leads and solder with silver solder. That x 2 & you are done.
>
> Great advice.
>
> Carbon comp. would be my last choice for R-Supp. in a parasitic choke.
>
> (((73)))
> Phil, K5PC
>
>
>
>
>
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.0.237 / Virus Database: 270.11.2/1964 - Release Date: 02/21/09
11:05:00
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|