You don't need carbon comp- use a pair of 100 ohm 5w Metal Oxide, Mouser
PN 286-100-RC. Make the strap from the tube anode to the plate choke as one
piece, make a "U" just big enough to fit 2 resistors inside, drill a whole
for the leads and solder with silver solder. That x 2 & you are done.
----- Original Message -----
From: "KB0NLY" <kb0nly@mchsi.com>
To: <amps@contesting.com>
Sent: Saturday, February 21, 2009 2:09 PM
Subject: [Amps] 47ohm 2W resistor, who still has them?
> Looking online it would appear that Mouser and Digi-Key no longer have
> 47ohm 2W carbon comp resistors for making parisitics. They are listed in
> the catalog but show up as non-stocked or obsolete on their websites.
>
> The only other source i could find is surplus sales of nebraska, and they
> want a hefty $5 each for them.
>
> If anyone knows a place that still sells them let me know, or if you have
> any that you could part with for cheap let me know. I need to make a new
> parasitic for the 6m amp i am building. My supply dried up from the last
> SB-200 i worked on.
>
> 73,
>
> Scott KB0NLY
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|