To: | "amps@contesting.com" <amps@contesting.com> |
---|---|
Subject: | Re: [Amps] Need source of connectors and/or cables forYaesu FT-1000D-to-FL-7000 rig |
From: | "Jim Brown" <jim@audiosystemsgroup.com> |
Date: | Thu, 20 Mar 2008 10:04:46 -0700 |
List-post: | <amps@contesting.com">mailto:amps@contesting.com> |
Thanks Joe. I've seen catalog listings for the correct FT1000 part at the sources I mentioned. I don't own a 7000. 73, Jim K9YC , On Thu, 20 Mar 2008 11:18:57 -0400, Joe Subich, W4TV wrote: >Note, the FT-1000D uses the DIN8/262 and not the more common DIN8 >plug. The FL-7000 requires a Molex connector details (Molex part >number) for the plug and pins are available at www.n4ats.com. In >addition the site has information on band data cable sources. _______________________________________________ Amps mailing list Amps@contesting.com http://lists.contesting.com/mailman/listinfo/amps |
<Prev in Thread] | Current Thread | [Next in Thread> |
---|---|---|
|
Previous by Date: | Re: [Amps] Need source of connectors and/or cables forYaesu FT-1000D-to-FL-7000 rig, Joe Subich, W4TV |
---|---|
Next by Date: | [Amps] thyristor controlled soft start?, Andy GD0TEP |
Previous by Thread: | Re: [Amps] Need source of connectors and/or cables forYaesu FT-1000D-to-FL-7000 rig, Joe Subich, W4TV |
Next by Thread: | [Amps] thyristor controlled soft start?, Andy GD0TEP |
Indexes: | [Date] [Thread] [Top] [All Lists] |