Note, the FT-1000D uses the DIN8/262 and not the more common DIN8
plug. The FL-7000 requires a Molex connector details (Molex part
number) for the plug and pins are available at www.n4ats.com. In
addition the site has information on band data cable sources.
73,
... Joe, W4TV
> -----Original Message-----
> From: amps-bounces@contesting.com
> [mailto:amps-bounces@contesting.com] On Behalf Of Jim Brown
> Sent: Thursday, March 20, 2008 3:27 AM
> To: amps@contesting.com
> Subject: Re: [Amps] Need source of connectors and/or cables
> forYaesu FT-1000D-to-FL-7000 rig
>
>
> DIN connectors are available from the usual suspects -- Newark,
> Allied, etc.
>
> One VERY important caution. The usual ham sources, as well as
> Mouser, etc. sell cheapo imitation DIN connectors that it is
> virtually impossible to solder to. Go for the better quality stuff
> from Switchcraft and other real connector mfrs. A lot more money,
> but they work.
>
> If you want the cheap ones that don't, I've got a bunch that I
> bought from RF connection that you can have for what I paid. :)
>
> 73,
>
> Jim K9YC
>
> On Tue, 18 Mar 2008 16:36:13 -0400, David J Windisch wrote:
>
> >R&L, the local Y-dealer, was unable to supply.
> >Any other help out there, please?
>
> >Tia & 73, Dave, N3HE
> >_______________________________________________
> >Amps mailing list
> >Amps@contesting.com
> >http://lists.contesting.com/mailman/listinfo/amps
>
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|