Do a Google search, there are any number of threads and URL's covering that
issue along with corrections. Way too much to cover here.
Carl
KM1H
----- Original Message -----
From: "Tom LeBron" <wz9l@sbcglobal.net>
To: <amps@contesting.com>
Sent: Sunday, November 25, 2007 12:38 PM
Subject: Re: [Amps] MFJ tuner and SB-200 for input matching
> Hello all, first time posting but been reading for a while. This is an
> interesting question. My SB-200 seems to have the input that appears to be
> off. Every time I try to tune, I have to use the radios internal tuner to
> get an swr that's acceptable to get the drive just to get 500 watts out
> put on the linear.
> Not to hijack the thread, but is there a way to check the inputs on the
> SB-200 with a MFJ tuner or Autek VA1 vector analyst.
> Thanks Tom WZ9L
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|