Amps
[Top] [All Lists]

Re: [Amps] MFJ tuner and SB-200 for input matching

To: "Shack" <noddy1211@sbcglobal.net>, "'amps'" <amps@contesting.com>
Subject: Re: [Amps] MFJ tuner and SB-200 for input matching
From: "jeremy-ca" <km1h@jeremy.mv.com>
Date: Sat, 24 Nov 2007 21:40:33 -0500
List-post: <mailto:amps@contesting.com>
Yes but the pi net values are wrong for best efficiency so dont spend a lot 
of time tuning and keep the output below 600W otherwise the switch might 
complain.

Carl
KM1H


----- Original Message ----- 
From: "Shack" <noddy1211@sbcglobal.net>
To: "'amps'" <amps@contesting.com>
Sent: Saturday, November 24, 2007 8:53 PM
Subject: Re: [Amps] MFJ tuner and SB-200 for input matching


> Is the plate choke okay for WARC (17 meters) bands?
>
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com] On
> Behalf Of Bob Nielsen
> Sent: Saturday, November 24, 2007 5:25 PM
> To: amps
> Subject: Re: [Amps] MFJ tuner and SB-200 for input matching
>
>
> On Nov 24, 2007, at 2:20 PM, Gudguyham@aol.com wrote:
>
>> The SB-200 has a tuned input and such a set up should NOT be
>> needed.  WHY?
>> Lou
>>
>
> WARC bands?
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>