Amps
[Top] [All Lists]

Re: [Amps] Dentron 1200L

To: "Dan Hearn" <dhearn@air-pipe.com>,"TROY D SINGLETON" <n5ark@comcast.net>, <AMPS@CONTESTING.COM>
Subject: Re: [Amps] Dentron 1200L
From: "jeremy-ca" <km1h@jeremy.mv.com>
Date: Sun, 1 Jul 2007 17:36:08 -0400
List-post: <mailto:amps@contesting.com>
Its 12VDC and will work with the 570

Carl
KM1H


----- Original Message ----- 
From: "Dan Hearn" <dhearn@air-pipe.com>
To: "TROY D SINGLETON" <n5ark@comcast.net>; <AMPS@CONTESTING.COM>
Sent: Sunday, July 01, 2007 1:07 PM
Subject: Re: [Amps] Dentron 1200L


>I just noticed that you do not have a manual for the amp. You can use your
> voltmeter to measure the voltage between the amp relay connector and 
> ground
> to see what the relay coil voltage is. 73, Dan
>
> -----Original Message-----
> From: amps-bounces@contesting.com [mailto:amps-bounces@contesting.com]On
> Behalf Of TROY D SINGLETON
> Sent: Sunday, July 01, 2007 9:34 AM
> To: AMPS@CONTESTING.COM
> Subject: [Amps] Dentron 1200L
>
>
>
> Hello,
>
> First of all let me say I have never owned a amp before now. I never 
> thought
> I needed one. I purchased a Dentron 1200-L Off of ebay a few weeks back. 
> The
> problem I am having is how to hook the amp up. I know this sounds stupid 
> but
> I dont have a manual or anything for this amp. I hooked the coax cables up
> and selected the band and set the load to 3. I sent out a CW tone and 
> tried
> tuning the thing but nothing on the meter changed. The plate voltage still
> says 1800 and any selector I change nothing happens. When I got to 
> transmitt
> there is no clicking in the amp or anything. I dont have a power meter at
> this time but I dont think nothing is going out of the amp. Do I need to
> hook anyhting else up..Relay-Alc? I am as lost as a goose in a snow storm. 
> I
> am tring to run this amp with a kenwood 570D. Any help would be much
> apreciated. I am diasabled and not able to lift this amp around much to 
> work
> on it. So that makes things even more difficult. If I do remove the top
> cover what should I look for and or test.
>
> Thanks
> N5ARK
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
> 

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>