> Subject: Re: [Amps] MOV Sizing
>
> Just had a thought on this subject - there are 'whole' house ac line surge
> protectors - industrial type - that are intended to be connected directly
> on the side of the the house breaker box. One source and example is:
> <http://www.surgeassure.com/product.asp?prod=TE/1SSA&gclid=CLf3roe02YoCFSh
> tSQodJy3NvQ >
>
> There are other brands and such available at electrical supply houses,
> etc.
>
> Another source is Grainger - they have Square D versions
> <http://www.grainger.com/Grainger/wwg/itemDetailsRender.shtml?ItemId=16135
> 42417 >
>
> Anyways you could use one of these (they usually are a small black box
> which are easy to bolt on to a box and to wire up) on your equipment.
>
> Just a thought.
Good thought, good solution, Bob.
I installed a Waber Power Master unit on my service entrance panel when I
built the ham shack several years ago. This protects everything, and saves
having to put MOV's in every project I construct here. It has a status LED
on the front.
(((73)))
Phil, K5PC
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|