>ORIGINAL MESSAGE:
>
>On Sat, 5 Aug 2006 08:27:35 +0100, Ian wrote:
>
>
>>People do that... but just because you can remove the anode cooler of a
>>GS35/31 or GI-7, that doesn't make it a good idea.
>
>------------ REPLY SEPARATOR ------------
>
>You misunderstand.
>
>I ddin't remove the fins at all, only the bolt that holds them in
>place. The cooling is not affected by the presence or absence of the
>bolt; its only function is to secure the fins. When I put the lug
>under the bolt and retightened it, things are just as they were
>before. There is almost no heat flow through the bolt itself.
Apologies, Bill. I see what you mean now.
The potential problem is only when a strap or a plate line is sandwiched
*between* the tube and the cooler
--
73 from Ian GM3SEK
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|