Thanks Joe ...
Joe Giacobello wrote:
> I also have had an order in for this motor for more than a month,
> which appears to be identical to the blower motor in the TT Titan
> 425. The Alpha part number is BLX-X129 and it is manufactured by
> McMillan. (The original manufacturer for the Titan motor appears to
> be out of business.) I'm told that McMillan won't sell fewer than 500
> at a time.
>
> I haven't reported this info previously because I wanted to be dead
> certain that these motors were indeed direct replacements for the
> Titan. At this time, I'm about 99% sure that they are.
>
> 73, Joe
>
> KR4DA wrote:
>
>>Alpha seems to have a supply issue with this motor.
>>I have ordered this motor over a month ago.
>>Two weeks ago they were working on getting them.
>>Today I called and a women answeared the call.
>>I have her name.....
>>Trying to stress my dispare and only wanting a RPM number
>>for the motor she got huffy and told me she wasn't discussing it
>>anymore with me and to email the company...
>>WOW must of been that time. But having delt with ALPHA before
>>and know they are better then that, I called back and
>>I talked to a very nice person Anthony...who has helped me before.
>>BUT there is no information they can give me on WHEN
>>they will get the motors in.
>>They recieve bad poor service just like we do from there
>>vender.
>>He did tell me he thinks the RPM is like 3000 rpm.
>>
>>The motor currently in MY 91B is labeled as:
>>BOMAX type b-jc 50/60hz .64amp 301-6623.
>>Bomax seems to be out of business.
>>But web page is up but no refernce to this number.
>>
>>Anyone have suggestion for replacement???
>>OH the windings are OPEN looking into the coil.
>>SO I hope this means it is bad...
>>tried hooking it direct to 120v and it no turn.
>>It is out of the amp and on the bench.
>>
>>I do not know how critical it is but there are on the web at emotorstore
>>c frame open motors CLOSE to the same specs.
>>
>>Plate thickness 16.6cm
>>shaft deminison .186 x 2in
>>115v .64a CW rpm 3000
>>http://www.emotorstore.com/productdetail.asp_Q_catID_E_6_A_subCatID_E_
>>251_A_productID_E_402_A_skuID_E_25484
>>has this part do you think I would it be ok to USE IT???
>>
>>I don't blame anyone but really think a person derserves better
>>communication from ALPHA on getting this fan.
>>This AMP cost me $2,748 in April 1997 that was alot of money to me.
>>And now cannot use it for HOW LONG???? until I get a motor.
>>
>>Frustrated Bob KR4DA
>>
>>
>>
--
Bob
Vmoa chat list -> http://autos.groups.yahoo.com/group/vmoachat/
Vmoa tech list home -> http://autos.groups.yahoo.com/group/vmoatech/
Middleburg Fl (South Jacksonville)
ICQ 13912841
Web Page http://bellsouthpwp.nwt/k/r/kr4da
Visit the FDXPG at http://www.geocities.com/w4wx1/
Ham Radio Calls: KR4DA FG/KR4DA J79DA HK0/KR4DA
Motorcycles CBMMA #4
1977 XS750D 1J7008405
1997 Vmax12J VMOA #504
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|