I also have had an order in for this motor for more than a month, which
appears to be identical to the blower motor in the TT Titan 425. The
Alpha part number is BLX-X129 and it is manufactured by McMillan. (The
original manufacturer for the Titan motor appears to be out of
business.) I'm told that McMillan won't sell fewer than 500 at a time.
I haven't reported this info previously because I wanted to be dead
certain that these motors were indeed direct replacements for the
Titan. At this time, I'm about 99% sure that they are.
73, Joe
KR4DA wrote:
>Alpha seems to have a supply issue with this motor.
>I have ordered this motor over a month ago.
>Two weeks ago they were working on getting them.
>Today I called and a women answeared the call.
>I have her name.....
>Trying to stress my dispare and only wanting a RPM number
>for the motor she got huffy and told me she wasn't discussing it
>anymore with me and to email the company...
>WOW must of been that time. But having delt with ALPHA before
>and know they are better then that, I called back and
>I talked to a very nice person Anthony...who has helped me before.
>BUT there is no information they can give me on WHEN
>they will get the motors in.
>They recieve bad poor service just like we do from there
>vender.
>He did tell me he thinks the RPM is like 3000 rpm.
>
>The motor currently in MY 91B is labeled as:
>BOMAX type b-jc 50/60hz .64amp 301-6623.
>Bomax seems to be out of business.
>But web page is up but no refernce to this number.
>
>Anyone have suggestion for replacement???
>OH the windings are OPEN looking into the coil.
>SO I hope this means it is bad...
>tried hooking it direct to 120v and it no turn.
>It is out of the amp and on the bench.
>
>I do not know how critical it is but there are on the web at emotorstore
>c frame open motors CLOSE to the same specs.
>
>Plate thickness 16.6cm
>shaft deminison .186 x 2in
>115v .64a CW rpm 3000
>http://www.emotorstore.com/productdetail.asp_Q_catID_E_6_A_subCatID_E_
>251_A_productID_E_402_A_skuID_E_25484
>has this part do you think I would it be ok to USE IT???
>
>I don't blame anyone but really think a person derserves better
>communication from ALPHA on getting this fan.
>This AMP cost me $2,748 in April 1997 that was alot of money to me.
>And now cannot use it for HOW LONG???? until I get a motor.
>
>Frustrated Bob KR4DA
>
>
>
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|