Amps
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [Amps] plate choke

from [GGLL] [Permanent Link][Original]
To: Amplificadores Lineales <amps@contesting.com>
Subject: Re: [Amps] plate choke
From: GGLL <nagato@arnet.com.ar>
Date: Fri, 26 Aug 2005 10:25:57 -0300
List-post: <mailto:amps@contesting.com> 
Alex Eban escribió:
> The main problem stems from the 160 meters operation!
> For the higher bands, chokes are usually in the range of 68 to 100
> microhenries. These are easily wound in a solenoid manner and if you space
> wind the last 20 turns or so, chances are you get a choke without resonances
> in the ham bands. 

        Alex, like the one shown in this site:

http://sp5gjn.za.pl

Best regards
Guillermo - LU8EYW.
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [Amps] plate choke, R . Measures
Next by Date:  Re: [Amps] plate choke, Will Matney
Previous by Thread:  Re: [Amps] plate choke, Will Matney
Next by Thread:  Re: [Amps] plate choke, Phil Clements
Indexes:  [Date] [Thread] [Top] [All Lists]