Amps
[Top] [All Lists]

Re: [Amps] 2nd grid resistor blow Ameritron AMP 811H

To: Steve Thompson <g8gsq@ic24.net>
Subject: Re: [Amps] 2nd grid resistor blow Ameritron AMP 811H
From: R.Measures <r@somis.org>
Date: Mon, 15 Aug 2005 20:10:37 -0700
List-post: <mailto:amps@contesting.com>
On Aug 15, 2005, at 2:04 PM, Steve Thompson wrote:

>
>> -   I have observed that serious parasites in 811s can put so much EMF
>> on the filament, that it shatters into pieces and falls to the bottom
>> of the glass envelope.
>>
>>
> Even with the amp in standby?

I was not there when it happened, I saw the 3 casualties after a Ham 
brought the AL-811 over for a post mortem.  As I recall, he said he 
heard a pop after concluding the power measurement, and the three 
filaments stopped glowing.  .
>
> Steve
>
>>> -- 
>>> 73,
>>> Vic, K2VCO
>>> Fresno CA
>>> http://www.qsl.net/k2vco
>>> _______________________________________________
>>> Amps mailing list
>>> Amps@contesting.com
>>> http://lists.contesting.com/mailman/listinfo/amps
>>>
>>>
>>>
>>>
>>
>> Richard L. Measures, AG6K, 805.386.3734.  www.somis.org
>>
>> _______________________________________________
>> Amps mailing list
>> Amps@contesting.com
>> http://lists.contesting.com/mailman/listinfo/amps
>>
>>
>>
>>
>>
>
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>

Richard L. Measures, AG6K, 805.386.3734.  www.somis.org

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>