Mark Marsden wrote:
>Hi Jeff
>
>60dB, that's quite a spec! Is that open loop, or with cartesian
>correction, or feed-forward?
>Current technology to do that (in the backed-off 10's of watts level) is
>rather complex.
>
>Mark
>
>
The requirement would be for 60 dB or better after correction...and
enough stability to ensure the correction actually works. In talking to
them...they hadn't gotten that far, yet.
BTW, we use feedforward amps with LDMOS in our products with 20W average
and about 200W PEP and achieve about -65 dBc IMD.
jeff, wa1hco
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|