Amps
[Top] [All Lists]

Re: [Amps] RF Parts OEM 3-500ZG's

To: Ian White GM3SEK <g3sek@ifwtech.co.uk>
Subject: Re: [Amps] RF Parts OEM 3-500ZG's
From: R.Measures <r@somis.org>
Date: Wed, 10 Aug 2005 00:17:48 -0700
List-post: <mailto:amps@contesting.com>
On Aug 9, 2005, at 11:44 PM, Ian White G/GM3SEK wrote:

> R. Measures wrote:
>> The weak sister in the 3K-A is cooling.  The el cheapo blower does not
>> produce enough air pressure
>
> Since Rich is talking about 60Hz mains, the problem will be even worse
> when the blower is powered from 50Hz.

Amen, Ian.  The work-around is to replace the induction motor with a DC 
brushless motor.  cheerz

> I can't speak for the whole Henry
> range, but the "6N2" and similar VHF amps imported into Europe were 
> very
> badly under-cooled.
>
>
> -- 
> 73 from Ian G/GM3SEK
> _______________________________________________
> Amps mailing list
> Amps@contesting.com
> http://lists.contesting.com/mailman/listinfo/amps
>
>

Richard L. Measures, AG6K, 805.386.3734.  www.somis.org

_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>