> My new AL-80B will be here in a few days and I wonder if like the 811H
> there are some "must have" mods? Anything from Measures on this amp? TY
There are no 'must haves'. A soft start mod is nice because it will
eliminate
the thump on startup and possibly make the on-off switch last longer. A QSK
mod
is nice because it will permit CW break in and SSB VOX operation without hot
switching. I myself wouldn't change the factory parasitic suppressor.
::Stock AL-80B already has a soft-start of sorts (series resistor shorted by
a relay several cycles after turn-on), there's not much strain on the power
switch and no turn-on thump. -WB2WIK/6
--
73,
Vic, K2VCO
Fresno CA
http://www.qsl.net/k2vco
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|