Amps
[Top] [All Lists]

Re: [Amps] Re: Ameritron 811

To: "Eric Dobrowansky" <kk2ed@comcast.net>, <amps@contesting.com>
Subject: Re: [Amps] Re: Ameritron 811
From: "Gary Smith" <wa6fgi@sbcglobal.net>
Reply-to: Gary Smith <wa6fgi@sbcglobal.net>
Date: Mon, 3 Jan 2005 12:43:39 -0800
List-post: <mailto:amps@contesting.com>
RF parts... good stuff, knowledgeable people.
73
Gary
WA6FGI

  ----- Original Message ----- 
  From: Eric Dobrowansky 
  To: amps@contesting.com 
  Sent: Monday, January 03, 2005 11:21 AM
  Subject: [Amps] Re: Ameritron 811


  Most likely the tube in the socket with the blown resistor has developed an 
  internal short. Call Ameritron and ask for replacement tubes if they are 
  under warranty.  I have repaired two 811s where one or two of the 811 tubes 
  have internally shorted, causing the 51 ohm resistors to repeadly fail until 
  the tubes were replaced. There is a high failure rate with the 811 tubes 
  MFJ/Ameritron is supplying with new amplifiers. They appear to be of the 
  cheapest Chinese variety. One owner gave up after two replacement sets from 
  MFJ, and went with a set from RF Parts, and has not had the cover off of the 
  amp since!


  Eric
  KE2D



  _______________________________________________
  Amps mailing list
  Amps@contesting.com
  http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps

<Prev in Thread] Current Thread [Next in Thread>