Craig,
What are the breaker specifics, number of poles, voltage rating, and etc? Does
this have wire leads, screw terminals, or bus taps? Could this actually be a
shunt trip breaker?
Jim Smith,
KQ6UV
----- Original Message -----
From: Craig
To: amps@contesting.com
Sent: Tuesday, August 10, 2004 12:06 AM
Subject: [Amps] Airpax Circuit Breaker?
Hi Amps
I have a 50 amp Airpax circuit breaker ModelUPL5023186-9. Its a 50 amp
breaker with a 120 volt series coil on one pole. I would like to use this
breaker for a amp project on a 240 volt line. The question is this. Can i
bypass the series coil on one pole, and will bypassing the series coil
allow that pole to operate as a normal breaker? I have checked the Airpax
web page, there's very little information there. I am more familiar with
the European DIN breakers rather these rare for us Airpax style breakers.
Craig
VK3HE
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
_______________________________________________
Amps mailing list
Amps@contesting.com
http://lists.contesting.com/mailman/listinfo/amps
|